78
Analysis. Typical tasks and solutions
When the measurement starts, all settings of the menu become unavailable
for editing.
To switch to the
Packet jitter Plot
screen, press the
button (
Plot
).
Figure 5.89. Packet jitter. Plot
To switch to the
Packet jitter Distribution
screen, press the
button
(
Distribution
).
Figure 5.90. Packet jitter. Distribution
At the screen two columns are shown. In the first one, intervals are dis-
played, the second one shows the quantity of packets (percentage) jitter value
of which lies within corresponding interval.
Upper limit of an interval can be specified in the
Packet jitter. Setup
menu
(see
Threshold, ms
parameter). Interval between null and the threshold value
is divided into defined number of sub-intervals. As a result of the test, in
the right column the percentage of packets with jitter within corresponding
sub-interval limits is displayed.
To switch to the
Results
menu press
button (
Results
). For more
details see section 5.19.
Bercut-ET. Operations manual
Summary of Contents for Bercut-ET
