A 1632
eMobility Analyser
Technical specifications
25
8.6 General data
Battery power supply .............................. 7.2 V d.c. (4.4 Ah Li-ion)
Battery charging time ............................. typical 4 h (deep discharge)
Mains power supply ...............................
115 V ~ ± 10 %
230 V ~ ± 10 %
230 V / 400 V 3~ ± 10 %
50 Hz - 60 Hz, 60 VA
Protection category ................................ 300 V CAT II
Battery operation time:
Idle state ................................................ > 32 h
Diagnostic test ....................................... > 18 h
Protection classification .......................... reinforced insulation
Measuring category ................................ 300 V CAT II
Pollution degree ..................................... 2
Degree of protection ............................... IP 65 (case closed), IP 40 (case open)
............................................................... IP 20 (mains test socket)
Dimensions (w
h
d)........................... 36 cm x 16 cm x 33 cm
Weight ................................................... 5.2 kg, (without accessories)
Sound / Visual warnings ........................ yes
Reference conditions:
Reference temperature range ................ 25
C ± 5
C
Reference humidity range ...................... 40 %RH
… 60 %RH
Operation conditions:
Working temperature range .................... -
10 °C … 50 °C
Maximum relative humidity .....................
90 %RH (0 °C … 40 °C), non-condensing
Working nominal altitude ........................ up to 3000 m
Storage conditions:
Temperature range ................................ -
10 °C … 70 °C
Maximum relative humidity ..................... 90 %RH (-10
C
… 40
C)
............................................................... 80 %RH (40
C
… 60
C)
RS 232 communication:
RS 232 serial communication ................. galvanic separated
Baud rate: ........................................ ...... 115200 baud rate, 1 stop bit, no parity
Connector: ............................................. standard RS232 9-pin D female
Bluetooth communication:
Bluetooth module ................................... class 2
Specifications are quoted at a coverage factor of k = 2, equivalent to a confidence level of
approximately 95 %.
Accuracies apply for 1 year in reference conditions. Temperature coefficient outside these limits
is 0.
2 % of measured value per °C, and 1 digit.
