A 1632
eMobility Analyser
Upgrading the adapter
20
6
Upgrading the adapter
The A 1632 eMobility Analyser can be upgraded from a PC via the RS 232 communication port.
This enables to keep the A 1632 eMobility Analyser up to date even if the standards or
regulations change. Download the latest firmware on the Metrel download centre:
https://www.metrel.si/en/downloads/
Figure 6.1: Upgrading the adapter
Procedure
Unscrew two screws (as indicated in
) and remove RS 232 connector
protection cover.
Connect standard DB9 RS232 interface cable on A 1632 and PC. (USB to RS232
adapter should be used if serial PC port is not available.)
Special upgrading software -
FlashMe
will guide you through the upgrading procedure.
When upgrade is finished, insert the RS 232 connector protection cover back.
Notes:
Contact your dealer for more information.
Upgrading the firmware over Bluetooth communication is not possible.
