manualshive.com logo in svg

Mercury 1.7 MI, Manual

Share
Download
Mercury 1.7 MI Manual Download Page 93

MAINTENANCE

SECTION 5

CMD-3967823 / 90-865237030   OCTOBER 2003

Page 85

CE533

Flushing The Power Package

NOTE:

 Flushing is needed only for salty, brackish, mineral laden or polluted water

applications. Flushing is recommended after each outing for best results.

CAUTION

Overheating from insufficient cooling water will cause engine and drive system

damage. Ensure that there is sufficient water always available at the water inlet

during engine operation.

CAUTION

If flushing with the boat in the water, seawater can flow into the engine causing

engine damage. Water inlet must be closed when flushing the engine.

1.

If flushing the engine with the boat in the water:

a. Close seacock, if equipped, or disconnect and plug seawater inlet hose.
b. Using an appropriate adapter, connect the flushing hose from a water source to the

seawater inlet hose on the seawater pickup pump inlet.

70355

70062

79463

a

b

c

d

e

f

g

a -

Seacock

b -

Seawater inlet hose

c -

Plug

d -

Adapter

e -

Flushing hose

f -

Water tap

g -

Seawater pickup pump

c. Proceed to Step 3.

INDEX

Summary of Contents for 1.7 MI

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands