manualshive.com logo in svg

Mercury 1.7 MI, Manual

Share
Download
Mercury 1.7 MI Manual Download Page 114

TROUBLESHOOTING

SECTION 7

Page 106

CMD-3967823 / 90-865237030   OCTOBER 2003

CE539

Turbocharger - Noisy Or Rough Operation

Possible Cause

Remedy

Poor lubrication / low oil pressure at

turbocharger.
Entry of foreign materials from intake or

exhaust side.

Have inspected by an authorized

Cummins MerCruiser Diesel dealer /

Rubbing of compressor or turbine

impellers against housing.

Cummins MerCruiser Diesel dealer /

distributor.

Bearing failure.

CE540

Turbocharger - White Smoke

Possible Cause

Remedy

Thermal blanket at turbocharger getting

hot, resulting in white smoke and burning

smell from turbocharger area

This is usually normal and occurs mostly

during the first hour of engine operation. If

the problem persists, have inspected by

an authorized Cummins MerCruiser Diesel

dealer / distributor.

CE541

Low Engine Oil Pressure

Possible Cause

Remedy

Faulty senders.

Have system checked by an authorized

Cummins MerCruiser Diesel dealer /

distributor.

Insufficient oil in crankcase.

Check and add oil.

Excessive oil in crankcase (causing it to

become aerated).

Check and remove required amount of oil.

Check for cause of excessive oil (improper

filling).

Diluted or improper viscosity oil.

Change oil and oil filter, using correct

grade and viscosity oil. Determine cause

for dilution (excessive idling).

INDEX

Summary of Contents for 1.7 MI

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands