manualshive.com logo in svg

Mercury 1.7 MI, Manual

Share
Download
Mercury 1.7 MI Manual Download Page 67

MAINTENANCE

SECTION 5

CMD-3967823 / 90-865237030   OCTOBER 2003

Page 59

CE469

Changing

Refer to the Maintenance Schedules for the change interval. Engine oil should be changed

before placing the boat in storage.

IMPORTANT: Change engine oil when the engine is warm from operation. Warm oil

flows more freely, carrying away more impurities. Use only recommended engine oil.

Refer to Specifications.

1. Start the engine and allow it to warm up to normal operating temperature.
2. Stop the engine and allow some time for oil to drain into oil pan (approximately 10

minutes).

3. Install the crankcase oil pump. Push the adapter onto the dipstick tube and attach the

pump.

77343

70571

a

b

c

a -

Dipstick tube

b -

Quicksilver Hose / Oil Pump Adapter (32-863642)

c -

Quicksilver Crankcase Oil Pump (802889A1)

4. Pump oil out of crankcase into drain pan.
5. When crankcase is empty, remove the pump and adapter.
6. Install the oil dipstick.

INDEX

Summary of Contents for 1.7 MI

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands