manualshive.com logo in svg

Mercury 1.7 MI, Manual

Share
Download
Mercury 1.7 MI Manual Download Page 76

MAINTENANCE

SECTION 5

Page 68

CMD-3967823 / 90-865237030   OCTOBER 2003

5. With the engine at normal operating temperature, check the coolant level in the coolant

recovery bottle.

6. The coolant level should be between the ADD and FULL marks.

75301

a

a -

Coolant recovery bottle

7. Add the specified coolant as necessary.

Description

Where Used

Part Number

Marine Engine Coolant

92-813054A2

Fleetguard Compleat (Product

91-50663 with DCA4 Additive)

Closed cooling system

Obtain Locally

8. If coolant level in coolant recovery bottle was low:

•

Inspect coolant recovery system for leaks.

•

Inspect pressure cap gaskets for damage and replace if necessary.

72714

a

a -

Gaskets

Also, the pressure cap maintains pressure on the coolant tank. It may not be holding

pressure properly. Contact your authorized Cummins MerCruiser Diesel dealer / distributor

to have the cap tested.

INDEX

Summary of Contents for 1.7 MI

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands