manualshive.com logo in svg

Mercury 1.7 MI, Manual

Share
Download
Mercury 1.7 MI Manual Download Page 65

MAINTENANCE

SECTION 5

CMD-3967823 / 90-865237030   OCTOBER 2003

Page 57

0062

Engine Oil

CAUTION

ENVIRONMENTAL HAZARD! Discharge of oil or oil waste into the environment is

restricted by law. Do not spill oil or oil waste into the environment when using or

servicing your boat. Contain and dispose of oil or oil waste as defined by local

authorities.

CE492

Checking

1. Stop the engine. Allow approximately 10 minutes for oil to drain into oil pan. The boat

must be at rest in the water.

2. Remove the dipstick. Wipe clean and reinstall fully into the dipstick tube.
3. Remove the dipstick and observe the oil level. The oil must be between the marks on

the dipstick. If necessary, add oil. Refer to Filling.

NOTE:

 The distance between marks is equivalent to approximately 1.0 liter (1 U.S. quart).

a

71380

b

c

77343

a -

Dipstick

b -

Maximum Mark

c -

Minimum Mark

INDEX

Summary of Contents for 1.7 MI

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands