manualshive.com logo in svg

Mercury 1.7 MI, Manual

Share
Download
Mercury 1.7 MI Manual Download Page 211

MAINTENANCE

SECTION 5

CMD-3967823 / 90-865237030   OCTOBER 2003

Page 79

2. Inspect serpentine belt for proper tension and for the following:

•

Excessive wear

•

Cracks

NOTE:

 Minor, transverse cracks (across the belt width) may be acceptable. Longitudinal

cracks (in direction of belt length) that join transverse cracks are NOT acceptable.

•

Fraying

•

Glazed surfaces

•

Proper tension

75130

a

b

c

a -

Transverse crack

b -

Longitudinal crack

c -

Fraying

3. Check the operation of the automatic tensioner and associated components. Move

tensioner pulley in direction of arrow (position a suitable tool on pulley fastener and

rotate). Release and allow to glide back slowly. Tensioner must return to it’s initial

position.

b

a

77139

Typical

a -

Serpentine belt

b -

Automatic tensioner

INDEX

Summary of Contents for 1.7 MI

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands