manualshive.com logo in svg

Mercury 1.7 MI, Manual

Share
Download
Mercury 1.7 MI Manual Download Page 106

STORAGE

SECTION 6

Page 98

CMD-3967823 / 90-865237030   OCTOBER 2003

5. Perform all lubrication and maintenance specified for completion Annually in

 Section

5

 - 

Maintenance Schedule

, except items that were performed at time of engine layup.

6. Fill fuel tanks with fresh diesel fuel. Old fuel should not be used. Check fuel lines and

connections for leaks and general condition.

7. Replace fuel filter.

CAUTION

When installing battery, connect POSITIVE (+) battery cable to POSITIVE (+) battery

terminal FIRST, and NEGATIVE (–) battery cable to NEGATIVE (–) battery terminal

LAST. If battery cables are reversed, or connection order is reversed, electrical

system damage will result.

8. Install a fully charged battery. Clean the battery cable clamps and terminals. Reconnect

the cables (see CAUTION listed above). Secure each cable clamp when connecting.

9. Coat terminals with a battery terminal anti-corrosion spray to help retard corrosion.

Description

Where Used

Part Number

Anti-corrosion spray

Battery terminals

Obtain Locally

INDEX

Summary of Contents for 1.7 MI

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands