manualshive.com logo in svg

Mercury 1.7 MI, Manual

Share
Download
Mercury 1.7 MI Manual Download Page 164

ON THE WATER

SECTION 3

Page 32

CMD-3967823 / 90-865237030   OCTOBER 2003

0032

Protecting People In The Water

While You Are Cruising

It is very difficult for a person standing or floating in the water to take quick action to avoid

a boat heading in his/her direction even at slow speed.
Always slow down and exercise extreme caution any time you are boating in an area where

there might be people in the water.
Whenever a boat is moving (coasting) in NEUTRAL/IDLE, there is sufficient force by the

water on the propeller to cause the propeller to rotate. This neutral propeller rotation can

cause serious injury.

While Boat Is Stationary

WARNING

Stop your engine immediately whenever anyone in the water is near your boat.

Serious injury to the person in the water is likely if contacted by a rotating propeller,

a moving boat, a gear case or any solid device rigidly attached to a moving boat or

gear case.

Shift into the NEUTRAL/IDLE position and shut off the engine before allowing people to

swim or be in the water near your boat.

INDEX

Summary of Contents for 1.7 MI

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands