manualshive.com logo in svg

Mercury 1.7 MI, Manual

Share
Download
Mercury 1.7 MI Manual Download Page 150

GETTING TO KNOW YOUR POWER PACKAGE

SECTION 2

Page 18

CMD-3967823 / 90–865237030   OCTOBER 2003

CE480

Audio Warning System

Your Cummins MerCruiser Diesel power package may be equipped with an Audio Warning

System. The Audio Warning System will not protect the engine or transmission from

damage. It is designed to warn the operator that a problem has occurred.
The audio warning system will sound with a continuous alarm if one of the following occurs:

•

Engine oil pressure too low

•

Coolant temperature too hot

•

Transmission fluid temperature too hot

70516

70518

Typical oil pressure gauge

Typical coolant temperature gauge

79753

Typical transmission fluid temperature switch

CAUTION

Operation of the engine after the audio warning system alarm has sounded could

result in damage to the power package. Do not operate engine once the alarm has

sounded EXCEPT TO AVOID A HAZARDOUS SITUATION.

If the alarm sounds, stop the engine immediately. Investigate the cause and correct it, if

possible. If the cause cannot be determined, consult your authorized Cummins MerCruiser

Diesel dealer / distributor.

TESTING THE AUDIO WARNING SYSTEM

1. Turn the ignition switch to the ON position without cranking the engine.
2. Engage the audio test switch and hold.
3. Listen for the alarm to sound indicating that the system is functioning correctly.

INDEX

Summary of Contents for 1.7 MI

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands