manualshive.com logo in svg

Mercury 1.7 MI, Manual

Share
Download
Mercury 1.7 MI Manual Download Page 218

MAINTENANCE

SECTION 5

Page 86

CMD-3967823 / 90-865237030   OCTOBER 2003

2.

If flushing the engine with the boat out of the water

:

WARNING

When flushing, be certain the area around propeller is clear, and no one is standing

nearby. To avoid possible injury, remove propeller.

a. Remove the propeller. Refer to boat manufacturers’ instructions.
b. Using an appropriate adapter, connect the flushing hose from a water tap to the

seawater inlet hose on the seawater pickup pump inlet.

79463

a

b

c

d

a -

Adapter

b -

Flushing hose

c -

Water tap

d -

Seawater pickup pump

c. Proceed to Step 3.

3. Partially open the water source to about 1/2 maximum. Do not use full water pressure.

CAUTION

Engine overheating can cause engine damage. To avoid, observe the water

temperature gauge and ensure the engine is operating in the normal ranges.

INDEX

Summary of Contents for 1.7 MI

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands