manualshive.com logo in svg

Mercury 1.7 MI, Manual

Share
Download
Mercury 1.7 MI Manual Download Page 239

TROUBLESHOOTING

SECTION 7

CMD-3967823 / 90-865237030   OCTOBER 2003

Page 107

CE542

Battery Will Not Charge

Possible Cause

Remedy

Excessive current draw from battery.

Turn off non-essential accessories.

Loose or dirty electrical connections or

damaged wiring.

Check all associated electrical

connections and wires (especially battery

cables). Clean and tighten faulty

connections. Repair or replace damaged

wiring.

Alternator drive belt loose or in poor

condition.

Replace serpentine belt and/or check

automatic tensioner.

Unacceptable battery condition.

Test battery.

CE543

Remote Control Operates Hard, Binds, Has Excessive Free-play Or Makes

Unusual Sounds

Possible Cause

Remedy

Insufficient lubrication on shift and throttle

linkage fasteners.

Lubricate.

Obstruction in shift or throttle linkages.

Remove obstruction.

Loose or missing shift and throttle

linkages.

Check all throttle linkages. If any are loose

or missing, see an authorized Cummins

MerCruiser Diesel dealer / distributor

immediately.

Shift or throttle cable kinked.

Straighten cable or have an authorized

Cummins MerCruiser Diesel dealer /

distributor replace cable if damaged

beyond repair.

Improper shift cable adjustment.

Have adjustment checked by an

authorized Cummins MerCruiser Diesel

dealer / distributor.

INDEX

Summary of Contents for 1.7 MI

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands