manualshive.com logo in svg

Mercury 1.7 MI, Manual

Share
Download
Mercury 1.7 MI Manual Download Page 105

STORAGE

SECTION 6

CMD-3967823 / 90-865237030   OCTOBER 2003

Page 97

CE502

Power Package Recommissioning

NOTICE

Refer to Cold Weather Or Extended Storage precautions, BEFORE proceeding.

1. Install the seawater pump impeller after ensuring that the splines are not worn and

inspecting it for worn or damaged vanes.
a. Remove the seawater pump cover mounting screws.
b. Remove the seawater pump cover and O-ring.
c. Install the seawater pump impeller into the housing by turning clockwise while simul-

taneously pushing inward.

d. Install a new O-ring on the seawater pump.
e. Install the seawater pump cover.
f. Install the seawater pump cover mounting screws. Tighten the screws evenly in a

diagonal pattern. Tighten the screws securely.

79743

a

b

d

b

79742

c

a -

Mounting screw (4)

b -

Cover

c -

Impeller

d -

O-ring

2. Ensure that all cooling system hoses are in good condition, connected properly, and

hose clamps are tight.

3. Verify that all drain valves and drain plugs are installed and tight.
4. Inspect all drive belts.

INDEX

Summary of Contents for 1.7 MI

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands