additional connection between the child
restraint system attached with LATCH-
type (ISOFIX) and the vehicle.
#
If necessary, move head restraint
1
upwards (
→
page 107).
#
Fold up cover
2
of Top Tether anchorage
3
.
#
Install the LATCH-type (ISOFIX) child restraint
system with Top Tether. Always comply with
the child restraint system manufacturer's
installation instructions when doing so.
#
Guide Top Tether belt
4
under head
restraint
1
between the two head restraint
bars.
#
Hook Top Tether hook
5
of Top Tether belt
4
without twisting into Top Tether anchor‐
age
3
.
#
Tension Top Tether belt
4
. Always comply
with the child restraint system manufactur‐
er's installation instructions when doing so.
#
Fold down cover
2
of Top Tether anchorage
3
.
#
If necessary, slide head restraint
1
down‐
wards (
→
page 107). Make sure that you do
not interfere with the correct routing of Top
Tether belt
4
.
Securing the child restraint system with the
seat belt
Securing the child restraint system with the
seat belt on the rear seat
When installing a belt-secured child restraint
system, observe the following:
O
Always comply with the manufacturer's
installation and operating instructions for
the child restraint system used.
O
When using a category 0/0+ baby car
seat and a category I rearward-facing
child restraint system on a rear seat:
adjust the front seat so that the seat does
not touch the child restraint system.
O
When using a category I forward-facing
child restraint system: remove the head
56 Occupant safety