Example: vehicles with individual rear seats
#
Place the mobile phone as close to the cen‐
ter of mat
1
as possible with the display
facing upwards.
When the indicator lamp at the front of the
mobile phone system lights up, the mobile
phone is being charged.
%
The mat can be removed for cleaning, e.g.
using clean, lukewarm water.
Installing and removing the floor mats
&
WARNING Risk of accident due to
objects in the driver's footwell
Objects in the driver's footwell may impede
pedal travel or block a depressed pedal.
This jeopardizes the operating and road
safety of the vehicle.
#
Stow all objects in the vehicle securely
so that they cannot get into the driver's
footwell.
#
Always install the floor mats securely
and as prescribed in order to ensure
that there is always sufficient room for
the pedals.
#
Do not use loose floor mats and do not
place floor mats on top of one another.
#
To install: press stud
1
into holder
2
.
#
To remove: pull the floor mat off holders
2
.
Installing/removing the pennant staff
Installing
The pennant staff is installed and removed in
identical fashion on both the driver's and front-
passenger sides.
Seats and stowing 143
