Mercedes-Benz E-Class Estate 2017, Owner'S Manual

Page: 191 / 585

#
Press and hold button 1 , 2 or 3 that you
wish to program.
Indicator lamp 4 flashes yellow.
% It can take up to 20 seconds before the indi‐
cator lamp flashes yellow.
#
Release the previously pressed button.
Indicator lamp 4 continues to flash yellow.
#
Point remote control 5 at a distance of
1 cm to 8 cm towards buttons 1 , 2 or 3 .
#
Press and hold button 6 of remote control
5 until:
R
Indicator lamp 4 lights up green contin‐
uously. Programming is complete.
R
Indicator lamp 4 flashes green. Pro‐
gramming was successful. Additionally,
synchronisation of the rolling code with
the garage door system must also be car‐
ried out.
#
If indicator lamp 4 does not light up or flash
green: repeat the procedure.
#
Release all of the buttons.
% The remote control for the garage door drive
is not included in the scope of delivery of the
garage door opener.
Synchronising the rolling code
Requirements:
R
The garage door system uses a rolling code.
R
The vehicle must be within range of the
garage door or exterior gate drive.
R
The vehicle as well as persons and objects,
are located outside the sweep of the garage
door.
#
Press the programming button on the door
drive unit.
Initiate the next step within approximately
30 seconds.
188 Driving and parking