+
1
Lowers the cone of light of the headlamps
when the load compartment is heavily
laden and when using the maximum per‐
missible rear axle load to the full
g
Normal position
-
1
Raises the cone of light of the headlamps
when all seats are occupied
#
Turn the headlamp range adjuster to the
position which corresponds to the load con‐
dition of your vehicle.
Operating the light combination switch
1
Main beam
2
Turn signal light, right
3
Headlamp flashing
4
Turn signal light, left
#
Pull or push the combination switch in the
relevant direction following the arrow.
Switching on the main beam manually
#
Vehicles with Adaptive Highbeam Assist:
Turn the light switch to the
L
position.
R
Press the combination switch beyond the
pressure point in the direction of
arrow
1
.
#
Vehicles with Adaptive Highbeam Assist
Plus: Turn the light switch to the
L
posi‐
tion.
R
Press the combination switch beyond the
pressure point in the direction of
arrow
1
.
When the main beam is activated, the indicator
lamp for dipped beam is deactivated and
replaced by the indicator lamp for the main
beam.
#
To switch off the main beam: move the
combination switch back to its starting posi‐
tion.
136 Light and sight
Summary of Contents for E-Class Estate 2017
