Mercedes-Benz Conecto Manual Download

Page: 74 / 268

Operation

Care/cleaning of leather covers

Note:

Any dirt and soap which remains must
be completely removed. If in doubt, rinse
again.

Note:

To prevent outlines forming, a wider
area around the mark should always be
treated.

Then dry the cleaned area with a
hairdryer using circular movements at
a distance of between 30 and 40 cm
on a medium heat setting.

Caution:

The leather covers must be completely
dry before they are used again. Perman-
ent pressure marks could otherwise form.

Caution:

If in any doubt, use a professional leather
cleaning company.

Leather care product

Note:

Information about suitable leather care
agents can be obtained from your EvoBus
Service Partner or from a professional
leather cleaning company.

CONECTO (C628.3--)/08.2007 GB

Summary of Contents for Conecto













































































































































































































































































Search results

Summary of Contents for Conecto

Reviews:

Related manuals for Conecto

Brands by name

Popular brands

Mercedes-Benz Conecto, Manual

Search results

Summary of Contents for Conecto

Reviews:

Related manuals for Conecto

Brands by name

Popular brands