Mercedes-Benz Conecto Manual Download

Page: 208 / 268

Opening/locking

Opening/closing the doors from the inside

Note:

Square key (2) is the only means of lock-
ing the door leaf.

Turn lock (1) in the direction of the
arrow using square key (2) or hand-
wheel (3).

The door is unlocked.

Note:

Handwheel (3) is able only to unlock the
door leaf.

Opening/closing the doors from the
inside

Note:

Precondition: bus stationary, electrical
system on.

Danger.

Do not drive the bus unless the doors are
properly closed.

M54_00-1300-71

Press one of pushbuttons (1) to (3).

The relevant door(s) open(s).

The indicator lamp in the pushbutton
pressed lights up.

198

CONECTO (C628.3--)/08.2007 GB

Summary of Contents for Conecto













































































































































































































































































Search results

Summary of Contents for Conecto

Reviews:

Related manuals for Conecto

Brands by name

Popular brands

Mercedes-Benz Conecto, Manual

Search results

Summary of Contents for Conecto

Reviews:

Related manuals for Conecto

Brands by name

Popular brands