Mercedes-Benz Conecto, Manual

Page: 91 / 268

At a glance
MTCO tachograph
1 Button for opening the re-
cording sheet tray: Driver 1
inserts the recording sheet
he has labelled with the front
side facing upwards onto the
partition plate in the record-
ing sheet tray. Driver 2 in-
serts the recording sheet he
has labelled with the front
side facing upwards under the
partition plate in the record-
ing sheet tray. The recording
sheets must be changed over
when there is a change of
driver.
2 Button for setting the re-
quired time group for driver
1: Press and hold the but-
ton until the required time
group appears on the display
screen.
3 Button for setting the re-
quired time group for driver
2: Press and hold the but-
ton until the required time
group appears on the display
screen.
4 Menu selection button (clock
adjustment, fault indication,
etc.): The clock time can be
changed at any time. Sum-
mer and winter time has been
programmed for several years
and is automatically changed.
5 Button (-): : Moving back
within the menu
6 Button (+): : Moving forwards
within the menu
7 Display (lit when ignition
switch is switched on): The
basic display (date, time and
total distance) appears if
there are no fault messages.
Flashing display = the record-
ing sheet tray time does not
correspond to the time on the
display screen (e.g. after a
voltage supply interruption or
changeover from summer to
winter time). The time is set
automatically: remove the re-
cording sheets and close the
recording sheet tray without
the recording sheets in it.
Observe the manufacturer's
operating instructions.
CONECTO (C628.3--)/08.2007 GB
81