Mercedes-Benz Conecto Page 121 Manual Download

Page: 121 / 268

Driver's area controls

Operating displays/driving mode/bus stop mode

Note:

For notes on safety and operation, refer
to the “Operation” section of the Operat-
ing Instructions.

Centralised lubrication (option)
active (permanent display)

M54_00-0604-01

Displayed if the centralised lubrication
system initiates (carries out) a lubrication
process.

Auxiliary heating active (permanent
display)

M54_00-0606-01

Displayed if the auxiliary heating has
been switched on using the pushbutton
in the heating/ventilation/air-condition-
ing control panel.

Driver's window and exterior mirror
heating active (permanent display)

M54_00-0607-01

Displayed if the driver's window and ex-
terior mirror heating have been switched
on using the pushbutton on the side
compartment.

Note:

Heating for the driver's window and exter-
ior mirror is only active for approximately
12 minutes.

CONECTO (C628.3--)/08.2007 GB

111

Summary of Contents for Conecto













































































































































































































































































Search results

Summary of Contents for Conecto

Reviews:

Related manuals for Conecto

Brands by name

Popular brands

Mercedes-Benz Conecto, Manual

Search results

Summary of Contents for Conecto

Reviews:

Related manuals for Conecto

Brands by name

Popular brands