Mercedes-Benz Conecto, Manual

Page: 72 / 268

Operation
Care/cleaning of micro-fibre covers
Caution:
The covers must be completely dry before
they are used again. Permanent pressure
marks could otherwise form.
Brush following the nap of the fabric
using a soft brush, without applying
pressure.
Removing stains
Caution:
Remove dirt as quickly as possible to
avoid permanent stains and prevent dam-
age to the covers.
Caution:
Do not use cleaning products containing
solvents (e.g. cleaning benzine, acetone,
alcohol, etc.). This would damage the
micro-fibre covers and equipment parts
made of plastic or foam beyond repair.
Remove as much dirt as possible
using a lint-free cloth.
Work mild, lukewarm soap into the
dirt using a soft sponge in circular
movements from the outside in. Ap-
ply light pressure when doing this.
Note:
Always work on the dirt from the outside
in so that the dirt is not spread over the
fabric.
Caution:
Do not use cleaning products containing
solvents (e.g. cleaning benzine, acetone,
alcohol, etc.). This would damage the
micro-fibre covers and equipment parts
made of plastic or foam beyond repair.
Remove the used soap using a clean,
soft sponge.
Wait until the freshly cleaned areas
are completely dry.
Caution:
The covers must be completely dry before
they are used again. Permanent pressure
marks could otherwise form.
Finally, brush the cover and the
cleaned areas using a soft brush
following the nap of the fabric.
Caution:
If in any doubt, use a professional textile
cleaning company.
62
CONECTO (C628.3--)/08.2007 GB