Mercedes-Benz Conecto, Manual

Page: 113 / 268

Driver's area controls
Operating displays/driving mode/bus stop mode
Brake pressure, supply pressure
and (engine) oil pressure
M54_00-1131-01
The brake pressure and supply pressure
for brake circuits one (1) and two (2) are
each represented by a bar ranging from
0 to a maximum of 12 bar. The thicker
bar represents the supply pressure, the
thinner bar the brake pressure of the rel-
evant brake circuit. The current oil pres-
sure of between 0 and 5 bar is displayed
below the display for brake circuits one
and two.
Fuel level, AdBlue level and
(engine) oil level
M54_00-1132-01
The fuel level is represented by a bar
ranging from 0 (empty) to 1 (full). The
same applies to the AdBlue level. The
“Oil level OK” message indicates that the
oil level is correct.
Note:
If the oil level is correct, it is not possible
to call up any further oil level information.
Note:
If the oil level is not correct, see the fol-
lowing displays.
Oil level too low
M54_00-1134-01
An insufficient oil level is indicated by
the “Oil level” message and the top-up
CONECTO (C628.3--)/08.2007 GB
103