Mercedes-Benz Conecto Manual Download Page 186

Page: 186 / 268

Heating/ventilation/air-conditioning

Passenger-compartment temperature - changing the base value

M83.00-0125-01

Press and hold pushbutton (11.4) for
at least 10 seconds.

The indicator lamps in pushbuttons
(11.3), (11.4) and (11.5) may flash
individually or in combination, de-
pending on the base value currently
set.

M83.00-0121-01

Press pushbutton (11.3).

The base value is increased. Press
once = increase by 2 °C. Press twice
= increase by 4 °C.

Note:

The base value can be increased by a
maximum of 4 °C.

M83.00-0123-01

Press pushbutton (11.5).

The base value is decreased. Press
once = decrease by 2 °C. Press
twice = decrease by 4 °C.

Note:

The base value can be decreased by a
maximum of 4 °C.

176

CONECTO (C628.3--)/08.2007 GB

Summary of Contents for Conecto













































































































































































































































































Search results

Summary of Contents for Conecto

Reviews:

Brands by name

Popular brands

Mercedes-Benz Conecto, Manual

Search results

Summary of Contents for Conecto

Reviews:

Brands by name

Popular brands