Mercedes-Benz Conecto Page 176 Manual Download

Page: 176 / 268

Heating/ventilation/air-conditioning

Driver’s area - adjusting the temperature

Turn switch (a) to position 4 (wind-
screen demisting).

Air flows out: at the windscreen (for
demisting) and at the instrument pan-
el

Note:

The blower runs at maximum output and
cannot be regulated.

Note:

The following air vents permanently blow
air: instrument panel, front right footwell
(adjustable), right-hand side of driver’s
cab.

Driver’s area - adjusting the
temperature

Note:

The temperature in the driver’s area is
continuously variable.

M83.00-0056-01

Turn switch (b) clockwise into the red
area.

The temperature in the driver's area
is increased.

Turn switch (b) anti-clockwise into
the blue area.

The temperature in the driver’s area
is reduced.

166

CONECTO (C628.3--)/08.2007 GB

Summary of Contents for Conecto













































































































































































































































































Search results

Summary of Contents for Conecto

Reviews:

Related manuals for Conecto

Brands by name

Popular brands

Mercedes-Benz Conecto, Manual

Search results

Summary of Contents for Conecto

Reviews:

Related manuals for Conecto

Brands by name

Popular brands