Mercedes-Benz Conecto Manual Download

Page: 140 / 268

Driver's area controls

Selecting the language on the screen

M54.00-0068-01

Switch on side lamps (1).

M54.00-0081-01

Slide sleeve (7) on the steering
column switch (wipe/wash) towards
the steering column for longer than 5
seconds.

The language control menu (country
codes) appears on the screen.

M00_00-0321-01

It is now possible to select the lan-
guage required by pressing the steer-
ing column switch down (to scroll
down) or up (to scroll up).

To save the displayed language (1),
slide and hold the sleeve on the
steering column switch again. Disk
icon (2) flashes while saving is in
progress.

130

CONECTO (C628.3--)/08.2007 GB

Summary of Contents for Conecto













































































































































































































































































Search results

Summary of Contents for Conecto

Reviews:

Related manuals for Conecto

Brands by name

Popular brands

Mercedes-Benz Conecto, Manual

Search results

Summary of Contents for Conecto

Reviews:

Related manuals for Conecto

Brands by name

Popular brands