Mercedes-Benz Conecto Manual Download

Page: 179 / 268

Heating/ventilation/air-conditioning

Additional driver's area ventilation (option)

Additional driver's area ventilation
(option)

Note:

Precondition: electrical system on.

M83_00-0753-71

Turn rotary knob (1) clockwise to
increase blower output.

The air distribution can now be set
using air vents (2).

Switching air-recirculation mode on
and off

Note:

Precondition: electrical system on.

M83.00-0121-01

Press pushbutton (11.3).

The indicator lamp in pushbutton
(11.3) lights up.

The roof hatches are closed.

The fresh-air flaps are closed.

The roof ventilators switch off.

Note:

Air-recirculation mode remains active for
approximately 10 minutes. Normal mode
is resumed automatically after this time.

Press pushbutton (11.3) again.

The indicator lamp in pushbutton
(11.3) goes out.

The roof hatches are opened.

The fresh-air flaps are opened.

The roof ventilators switch on.

CONECTO (C628.3--)/08.2007 GB

169

Summary of Contents for Conecto













































































































































































































































































Search results

Summary of Contents for Conecto

Reviews:

Related manuals for Conecto

Brands by name

Popular brands

Mercedes-Benz Conecto, Manual

Search results

Summary of Contents for Conecto

Reviews:

Related manuals for Conecto

Brands by name

Popular brands