Mercedes-Benz B 250 e 2015, Owner'S Manual

Page: 93 / 293

X
To raise: pull the head restraint up to the
desired height.
X
To lower: press release catch : and push
the head restraint down until it is in the
desired position.
Removing and fitting the rear seat head
restraints
X
Fold the seat backrest slightly forwards in
order to remove the head restraint
(
Y
page 228).
X
To remove: pull the head restraint up to the
stop.
X
Press release catch : and pull the head
restraint out of the guides.
X
To refit: insert the head restraint so that the
notches on the bar are on the left when
viewed in the direction of travel.
X
Push the head restraint down until you hear it
engage in position.
Adjusting the 4-way lumbar support
You can adjust the contour of the front seat
backrests individually to provide optimum sup-
port for your back.
:
Raises the backrest contour
; Softens the backrest contour
=
Lowers the backrest contour
? Hardens the backrest contour
Switching the seat heating on/off
Switching on/off
G
WARNING
If you repeatedly switch on seat heating, the
seat cushion and backrest padding may
become very hot. The health of vehicle occu-
pants with limited temperature sensitivity or a
limited ability to react to excessively high
temperatures may be affected or they may
even suffer burn-like injuries. There is a risk of
injury.
Therefore, do not switch on the seat heating
repeatedly.
The three red indicator lamps in the button indi-
cate the heating level you have selected.
The system automatically switches down from
level 3 to level 2 after approximately eight
minutes.
90
Seats
Se
ats,
ste
eri
ng
whe
el
an
d
mirro
rs