Mercedes-Benz B 250 e 2015, Owner'S Manual

Page: 236 / 293

X
Only secure the roof carrier to the anchorage
points under covers : .
X
Observe the manufacturer's installation
instructions.
Features
Cup holders
Important safety notes
G
WARNING
The cup holder cannot secure a drinks con-
tainer in place during a journey. If you use a
cup holder during a journey, the drinks con-
tainer could be flung around and liquid could
be spilt. Vehicle occupants could come into
contact with the liquid and, in particular, be
scalded by hot liquid. You could be distracted
from the traffic situation and lose control of
the vehicle. There is a risk of an accident and
injury.
Only use the cup holder when the vehicle is
stationary. Only place containers of a suitable
size in the cup holder. Seal the container, in
particular when it contains hot liquid.
G
WARNING
If objects in the passenger compartment are
stowed incorrectly, they can slide or be
thrown around and hit vehicle occupants.
There is a risk of injury, particularly in the
event of sudden braking or a sudden change
in direction.
R
Always stow objects so that they cannot be
thrown around in such situations.
R
Always make sure that objects do not pro-
trude from stowage spaces, parcel nets or
stowage nets.
R
Close the lockable stowage spaces before
starting a journey.
R
Stow and secure objects that are heavy,
hard, pointed, sharp-edged, fragile or too
large in the luggage compartment.
!
Only use the cup holders for containers of
the right size and which have lids. The drinks
could otherwise spill.
Observe the loading guidelines (
Y
page 224).
The stowage compartments in the doors provide
space for bottles:
R
front: capacity up to 1.5 l
R
rear: capacity up to 0.5 l
Cup holders in the front centre console
The cup holder and the rubber mat underneath
can be removed for cleaning. Clean them with
clean, lukewarm water only.
X
To remove: carefully pull in upper sections of
cup holder : on the driver's and front-
passenger sides until they release.
X
Lift the cup holder up ; until it can be
removed.
X
To fit: insert cup holder into lateral curved
sections ; in the stowage compartment.
Insert the cup holder so that the wedge of the
upper section of cup holder : faces for-
wards.
X
Press the cup holder downwards until it
engages on the right and left-hand sides.
Features
233
Stowing
and
features
Z