described for the blackout screen
2
, and
allow it to hang in the cab.
#
Where necessary, press the screens against
the roof frame and insert the hexagon socket
wrench
5
into the actuator motor through
the opening
4
.
#
Turn the hexagon socket wrench
5
clock‐
wise until the sliding sunroof is completely
closed.
#
Insert the guide bar
1
for the insect roller
screen
3
into the screen guides in the roof
frame, turn it so that it is parallel to the end
position and guide the screen back into the
end position.
#
Insert the guide bar for the blackout screen
2
into the screen guides in the roof frame,
turn it so that it is parallel to the end position
and guide the blackout screen
2
back into
the end position.
Resetting the sliding sunroof
Reset the sliding sunroof after a voltage supply
interruption or when it has been opened with a
jerk.
#
Press and hold the
P
button until the slid‐
ing sunroof has been completely closed for
three seconds.
Closing the pop-up roof mechanically
%
The flathead screwdriver (blade width: 4 mm)
can be found in the vehicle tool kit.
Vehicles with a ClassicSpace cab
#
Remove the cover cap from the opening
1
.
#
Insert the flathead screwdriver
2
into the
actuator motor through the opening
1
and
turn it anti-clockwise until the pop-up roof is
completely closed.
#
Insert the cover cap into the opening
1
.
Vehicles with a Big-/Stream-/GigaSpace cab
#
Remove the cover from the roof lining
#
Insert the flathead screwdriver
4
into the
actuator motor through the opening
3
and
turn it anti-clockwise until the pop-up roof is
completely closed.
52
Opening and closing
Summary of Contents for Actros
Page 21: ......
