Mercedes-Benz Actros Operating Instructions Manual Download Page 160

Page: 160 / 418

Briefly press the

symbol in the multime‐

dia system display (

page 156).

The applications are displayed.

Select the application by swiping and tapping.

Changing the arrangement of applications on

the home screen

Call up the home screen.

Touch and hold an application on the

touchscreen until symbols appear.

Tap on

;

and move the applica‐

tion in the menu.

Tap on

Switching the sound on/off

Switching sound off/on at the multifunction

steering wheel

To mute: press button

The

symbol appears in the status line of

the display.

To switch on: press button

or change the

media source.

Please note that you can switch the sound on

or off in the menu currently active, e.g. radio,

media.

Adjusting the volume

On the multifunction steering wheel

To increase the volume: press button

The volume of the current radio or media

source is set. The volume of other audio sour‐

ces can be adjusted separately.

To reduce the volume: press button

The volume of the current radio or media

source is set. The volume of other audio sour‐

ces can be adjusted separately.

Adjust the volume in the following situations:

during a traffic announcement

during a navigation announcement
The volume of the current media source

changes in accordance with the volume of the

navigation announcement.
The function is available in the following

cases:

An iPhone

is connected via Apple Car‐

Play

or a mobile phone is connected via

Android Auto with the multimedia system.

A mobile phone is connected via Android
Auto or an iPhone

is connected via

Apple CarPlay

with the multimedia sys‐

tem.

A navigation application is available on

the mobile phone.

Favourites

Overview of favourites
Favourites offer you quick access to frequently

used applications. It is possible to create 20

favourites in total.

158 Multimedia system

Summary of Contents for Actros



































































































































































































































































































































































































































Search results

Summary of Contents for Actros

Reviews:

Related manuals for Actros

Brands by name

Popular brands

Mercedes-Benz Actros, Operating Instructions Manual

Search results

Summary of Contents for Actros

Reviews:

Related manuals for Actros

Brands by name

Popular brands