Mercedes-Benz Actros Operating Instructions Manual Download Page 132

Page: 132 / 418

BlueTec

6 exhaust gas aftertreatment

Display messages

Possible causes/consequences and

Solutions

AdBlue reserve

* Supplementary text

Please top up AdBlue.

The AdBlue

level has dropped to approximately 10%.

Top up the AdBlue

tank immediately (

page 284).

Otherwise, engine output may be reduced and speed may be

limited to approximately 20 km/h.

AdBlue reserve

* Supplementary text

Please top up with AdBlue. Risk of

reduction in engine power

The

indicator lamp in the status area also lights up. The

AdBlue

level has dropped to approximately 7.5%.

Top up the AdBlue

tank immediately (

page 284).

Otherwise, engine output may be reduced and speed may be

limited to approximately 20 km/h.

AdBlue very low

* Supplementary text

Please top up with AdBlue. Reduction in

engine power after stopping

The

indicator lamp in the status area also lights up. The

AdBlue

level has dropped to approximately 2.5%.

Top up the AdBlue

tank immediately (

page 284).

Otherwise, engine output will be reduced the next time the vehi‐

cle comes to a standstill and speed may be limited to approx‐

imately 20 km/h.

AdBlue empty

* Supplementary text

Please top up with AdBlue Risk of limit

speed

The

indicator lamp in the status area also lights up. The

AdBlue

level has dropped to approximately 0%.

Engine output will be reduced.

Adapt your driving style accordingly.

Top up the AdBlue

tank immediately (

page 284).

Otherwise, the vehicle speed may be limited to approximately

20 km/h.

Engine power reduced

* Supplementary text

Please top up with AdBlue Risk of limit

speed

The

indicator lamp in the status area also lights up. The

AdBlue

level has dropped to approximately 2.5%.

Engine output will be reduced.

Adapt your driving style accordingly.

Top up the AdBlue

tank immediately (

page 284).

Otherwise, the vehicle speed may be limited to approximately

20 km/h.

Limit speed

* Supplementary text

Please top up AdBlue.

The

indicator lamp in the status area also lights up. The

AdBlue

level has dropped to approximately 0%.

The speed is limited to approximately 20 km/h.

130 On-board computer and displays

Summary of Contents for Actros



































































































































































































































































































































































































































Search results

Summary of Contents for Actros

Reviews:

Mercedes-Benz Actros, Operating Instructions Manual, Page: 132 / 418

Search results

Summary of Contents for Actros

Reviews: