Mercedes-Benz Actros Operating Instructions Manual Download Page 186

Page: 186 / 418

Apple CarPlay

Overview of Apple CarPlay

WARNING Risk of distraction from infor‐

mation systems and communications

equipment

If you operate information and communica‐

tion equipment integrated in the vehicle when

driving, you will be distracted from the traffic

situation. This could also cause you to lose

control of the vehicle.

Only operate this equipment when the

traffic situation permits.

If you cannot be sure of this, stop the

vehicle whilst paying attention to road

and traffic conditions and operate the

equipment with the vehicle stationary.

You must observe the legal requirements for the

country in which you are currently driving when

operating the multimedia system.
iPhone

functions can be used via the multime‐

dia system using Apple CarPlay

. They are oper‐

ated using the touchscreen, Touch Control or the
Siri

voice-operated control system. You can acti‐

vate the voice-operated control system by press‐

ing and holding the

button on the multifunc‐

tion steering wheel.
Only one mobile phone at a time can be connec‐
ted via Apple CarPlay

to the multimedia system.

The availability of Apple CarPlay

may vary

according to the country.
Please note when using Apple CarPlay

that this

is not suitable for route planning in commercial

vehicles.
The service provider is responsible for this appli‐

cation and the services and content connected to

it.

Information on Apple CarPlay

Only one route guidance can be active at a time.
If route guidance is active using Apple CarPlay

it is closed if route guidance is started on the

multimedia system. If route guidance is active

using the multimedia system, it is closed if route
guidance is started via Apple CarPlay

Connecting an iPhone

via Apple CarPlay

Requirements:

The multimedia system is equipped with the

function.

The current version of your device's operating

system is being used (see the manufacturer's

operating instructions).

The full range of functions for Apple CarPlay

is only available with an Internet connection.

Connect the iPhone

to the

USB port

on the multimedia system using a suitable

cable (

page 189).

If no other device is connected with the sys‐
tem via Bluetooth

: confirm the data protec‐

tion provisions.

If another device is connected via Bluetooth

or Apple CarPlay

with the system: tap on the

Tap here to start Apple CarPlay for:

Mobile

phone>

message.

Select the iPhone

in the

device list

under the application.
The previous connection via Bluetooth

Apple CarPlay

is disconnected. The device

newly connected via cable is active.

Alternative: If Apple CarPlay

is already

active (e.g. when music is being played or the

navigation system is being used), you can call

up the application using the

buttons.

Accepting/rejecting the data protection pro‐

visions
A message with the data protection provisions

appears.

Select

Decline & end__Accept & start

When the Apple CarPlay

connection is

active, you can switch

Start automatically

or off.

Exiting Apple CarPlay

Press the

button.

If Apple CarPlay

was not displayed in the

foreground before disconnecting, the applica‐

tion starts in the background when reconnec‐
ted. You can call up Apple CarPlay

in the

main menu.

184 Multimedia system

Summary of Contents for Actros



































































































































































































































































































































































































































Search results

Summary of Contents for Actros

Reviews:

Mercedes-Benz Actros, Operating Instructions Manual, Page: 186 / 418

Search results

Summary of Contents for Actros

Reviews: