manualshive.com logo in svg

Mercedes-Benz Actros, Operating Instructions Manual, Page: 138 / 418

Share
Download
Mercedes-Benz Actros Operating Instructions Manual Download Page 138

Display messages

Possible causes/consequences and 

M

 Solutions

#

Stop the vehicle without steering or braking suddenly. Pay atten‐

tion to the traffic conditions.

#

Check the tyre pressure and correct if required.

å

r

Starting-off aid active

* The starting-off aid on the trailer/semitrailer is activated.

#

Read the separate operating instructions issued by the trailer/

semitrailer manufacturer.

ó

r

Additional axle raised

* The leading/trailing axle on the trailer/semitrailer is raised.

#

Read the separate operating instructions issued by the trailer/

semitrailer manufacturer.

ñ

Note trailer height.

* The 

ï

 indicator lamp will light up yellow on the instrument clus‐

ter as well as the event window. The level control system for the

trailer/semitrailer is not at driving level.
WARNING! The vehicle's driving and braking characteristics may

change during driving.
There is a risk of accident if you do not adapt your driving style.
Be aware of underpass headroom. Also comply with the information

in the separate operating instructions provided by the trailer/semi‐

trailer manufacturer.

#

Set the level control system for the trailer/semitrailer to driving

level; see the separate operating instructions provided by the

trailer/semitrailer manufacturer.

b

r

Turn signal faulty

 (Exam‐

ple)

* The turn signal light on the trailer/semitrailer is faulty.

#

Replace the corresponding bulb; see the separate operating

instructions issued by the trailer/semitrailer manufacturer.

136 On-board computer and displays

Summary of Contents for Actros



































































































































































































































































































































































































































Reviews:

No comments