Engine model plate
Example: OM 471 engine
Engine model plate
1
is located at the rear of
the crankcase on the left-hand side when viewed
in the direction of travel.
Engine model plate
1
contains the following
information:
R
manufacturer
R
engine type
R
engine model designation
R
engine number
%
On vehicles with the OM 460 engine, the
engine model plate is located on the crank‐
case on the right-hand side when viewed in
the direction of travel.
Vehicle identification plate/axle loads
Vehicle identification plate and vehicle identi‐
fication number (VIN)
Example: vehicle identification number (VIN) and
vehicle identification plate
Vehicle identification plate
1
is located in the
door frame on the co-driver's side. Vehicle identi‐
fication number (VIN)
2
is stamped on the longi‐
tudinal frame member in the right wheel well.
Information on the vehicle identification plate
Example: vehicle identification plate
1
Vehicle manufacturer (Daimler AG)
2
EU general operating permit number (only in
certain countries)
3
Vehicle identification number (VIN)
4
Permissible gross weight (kg)
Permissible gross vehicle combination weight
(kg)
5
Permissible axle loads of axles 1 to 4 (kg)
6
Permissible load of axle group T (kg)
7
Flue gas coefficient
8
Rear axle ratio
9
Basic headlamp setting
A
Vehicle model or vehicle model designation
You will find the technically permissible gross
vehicle combination weight on the vehicle identi‐
fication plate or in the COC documents. Note
that, in ADR mode, the technically permissible
gross vehicle combination weight is set by the
continuous brake effect of the vehicle. You will
find this value in your ADR certification.
If you require further assistance, consult a
Mercedes-Benz Service Centre.
Service products
Notes on operating fluids
&
WARNING Risk of injury from operating
fluids harmful to your health
Operating fluids may be poisonous and harm‐
ful to your health.
384 Technical data
Summary of Contents for Actros
Page 21: ......