Mercedes-Benz Actros Operating Instructions Manual Download Page 141

Page: 141 / 418

Display messages

Possible causes/consequences and

Solutions

Active Brake Assist not

available

* Supplementary text

Please have rectified at next mainte-

nance.

(example).

WARNING! If Active Brake Assist is not available, you will not receive

any collision warnings. In critical situations, the vehicle will not

brake automatically.
There is a risk of an accident if you do not adapt your driving style.

If necessary, use the service brake to brake the vehicle.

Have the Active Brake Assist system checked at a qualified spe‐

cialist workshop.

Camera's optical field of

vision, dirty

* Supplementary text

Stop vehicle and clean the windscreen

Lane Keeping Assist and Attention Assist unavailable

(example).

WARNING!
The following driver assistance systems/driving safety systems
could be impaired or no longer operational:

Lane Keeping Assist

Attention Assist

Adaptive Highbeam Assist

Traffic Sign Assist

Active Brake Assist

Distance control assistant

Active Drive Assist

There is a risk of an accident.

Clean the area of the windscreen where the camera is located

(

page 318).

Lane Keeping Assist not

available

(Example)

* Supplementary text

Visit workshop Camera calibration

faulty Lane Keeping Assist and Attention Assist unavailable

WARNING!
The following driver assistance systems/driving safety systems
could be impaired or no longer operational:

Lane Keeping Assist

Attention Assist

Adaptive Highbeam Assist

Traffic Sign Assist

Active Brake Assist

Distance control assistant

Active Drive Assist

There is a risk of an accident.

Have the affected driver assistance system/driving safety sys‐

tem checked at a qualified specialist workshop.

On-board computer and displays

139

Summary of Contents for Actros



































































































































































































































































































































































































































Search results

Summary of Contents for Actros

Reviews:

Mercedes-Benz Actros, Operating Instructions Manual, Page: 141 / 418

Search results

Summary of Contents for Actros

Reviews: