Mercedes-Benz Actros Operating Instructions Manual Download Page 167

Page: 167 / 418

Activate or deactivate

Auto. volume adjust-

ment

Adjusting the balance/fader
The availability of this function depends on the

vehicle equipment.
Multimedia system:

Operation

Settings

Display & operation

Balance and Fader

Adjusting the balance

Move the volume distribution in the displayed

grid between the right and left sides of the

vehicle.

The volume is distributed between the left

and right speakers in the vehicle.

Setting the fader

Move the volume distribution in the displayed

grid between the front and rear sections of

the vehicle.

The volume is distributed between the front

and rear speakers in the vehicle.

Initiating system activation

Multimedia system:

Settings

System

System activation

CarPlay certificate list

Select

System activation

Navigation

Notes on navigation

WARNING Risk of distraction from oper‐

ating integrated communication equip‐

ment while the vehicle is in motion

If you operate communication equipment

integrated in the vehicle when driving, you

will be distracted from the traffic situation.

This could also cause you to lose control of

the vehicle.

Only operate this equipment when the

traffic situation permits.

If you cannot be sure of this, stop the

vehicle whilst paying attention to road

and traffic conditions and operate the

equipment with the vehicle stationary.

You must observe the legal requirements for the

country in which you are currently driving when

operating the system.
The navigation system calculates the route to the
destination without taking into account, for exam‐
ple:

traffic lights

stop signs and right-of-way signs

parking and stopping restrictions

road narrowing

other road and traffic controls and regula‐

tions

The navigation system may provide incorrect nav‐

igation announcements if reality does not corre‐

spond with the data on the digital map, for exam‐

ple a route may have been diverted or the direc‐

tion of a one-way street may have changed.
For this reason, you must always observe road

and traffic rules and regulations during your jour‐

ney. Traffic regulations always take precedence

over the system's navigation announcements.

Information on GPS reception

Position finding and route guidance take place

using GPS (

Global Positioning System). Correct

functioning of the navigation system depends,

amongst other things, on GPS reception. In cer‐

tain situations, GPS reception may be impaired,

there may be interference or there may be no

reception at all, e.g. in tunnels or multi-storey car

parks.
You will find information on the GPS status in the

Fleetboard portal under "Information" .

Navigation menu

Calling up the navigation system menu
Multimedia system:

Navigation

Multimedia system

165

Summary of Contents for Actros



































































































































































































































































































































































































































Search results

Summary of Contents for Actros

Reviews:

Mercedes-Benz Actros, Operating Instructions Manual, Page: 167 / 418

Search results

Summary of Contents for Actros

Reviews: