Mercedes-Benz Actros Operating Instructions Manual Download Page 151

Page: 151 / 418

Display messages

Possible causes/consequences and

Solutions

When an automatic collision warning is being given, you must brake
the vehicle using the service brake in the following situations:

the on-board computer displays the

warning in a red event

window

an intermittent warning tone sounds

Pay particular attention to the traffic situation.

Brake the vehicle using the service brake.

Engage parking brake.

* The distance control assistant has stopped the vehicle.

The parking brake was not applied and one of the following actions
was performed:

The driver left the driver's seat.

The driver's door was opened.

The engine was switched off.

WARNING! The distance control assistant function is no longer keep‐

ing the vehicle stationary. The parked vehicle could roll away. You

could endanger yourself and others.
There is a risk of an accident.

Apply the parking brake.

Engage parking brake.

* You have not applied the parking brake.

You have parked the vehicle with a gear engaged and the parking

brake released. After the engine has been switched off, the trans‐

mission automatically shifts to neutral.
WARNING! The parked vehicle could roll away. You could endanger

yourself and others.
There is a risk of an accident.

Apply the parking brake.

Engage parking brake.

* Vehicles with a parameterisable special module (PSM): the parking

brake is not applied.
The parking brake has not been applied before engaging power take-

off.
WARNING! The parked vehicle could roll away. You could endanger

yourself and others.
There is a risk of an accident.

Apply the parking brake before engaging power take-off.

Increased brake force

and pedal travel

* Supplementary text

Stop vehicle. Contact service centre.

In addition, the

warning lamp lights up red in the instrument

cluster.
Full braking power may not be available.
WARNING! Driving and braking characteristics are affected. The

operating and road safety of the vehicle are jeopardised.
There is a risk of an accident.

Carefully bring the vehicle to a standstill and park it safely.

On-board computer and displays

149

Summary of Contents for Actros



































































































































































































































































































































































































































Search results

Summary of Contents for Actros

Reviews:

Mercedes-Benz Actros, Operating Instructions Manual, Page: 151 / 418

Search results

Summary of Contents for Actros

Reviews: