Mercedes-Benz Actros, Operating Instructions Manual, Page: 354 / 418

#
Position the jack under the axle tube,
between the mounting brackets.
Trailing axle with air suspension
#
Position the jack under the jack support point
on the air suspension support.
Steered trailing axle
#
Position the jack so that the jack plunger is
centrally located under the axle carrier.
Removing a wheel
1
To loosen
2
To tighten
#
Using the wheel wrench, loosen
1
the wheel
nut covers and remove them.
#
Unscrew the wheel nuts that secure wheel
nut cover 1 .
#
Remove wheel nut cover 1 .
#
Remove the remaining wheel nuts.
#
Remove the wheel.
#
Vehicles with 14.00 R 20 twin tyres: remove
the wheel nuts for the inner wheel from the
connecting flange and then remove the con‐
necting flange.
#
Vehicles with 14.00 R 20 twin tyres: remove
the inner wheel.
Fitting a wheel
* NOTE Damage to wheel nuts or wheel
studs
#
Do not tighten the wheel nuts or wheel
studs with an impact wrench. They
could be damaged as a result.
352 Breakdown assistance