Starting/ending mobile phone voice recogni‐
tion
Requirements:
R
The mobile phone in the foreground is con‐
nected with the multimedia system
(
/
page 178).
Starting mobile phone voice recognition
#
Press and hold the
£
button on the multi‐
function steering wheel for at least one sec‐
ond.
You can now use the mobile phone voice rec‐
ognition.
To end mobile phone voice recognition
#
Press the
8
or
~
button on the multi‐
function steering wheel.
%
If a mobile phone is connected via the smart‐
phone integration, the voice recognition of
this mobile phone is started or stopped.
Calls
Telephone operation
Multimedia system:
4
©
5
Phone
Making a call by entering the numbers
#
Select
_
.
#
Enter a number.
#
Select
R
.
The call is made.
Accepting a call
#
Select
R
Accept
.
Rejecting a call
#
Select
k
Reject
.
Ending a call
#
Select
k
beenden
(End) .
Putting a call on hold and rejecting a call
#
Select
Call on hold
.
The call is put on hold or rejected.
Depending on the mobile phone, behaviour
when rejecting a call may vary (see manufac‐
turer's operating instructions).
#
When the call is on hold: select
Reject
k
.
The call is rejected.
Activating functions during a call
The following functions are available during a call:
k
End call
beenden
(End)
m
Microphone
_
Numerical
(show to send DTMF tones)
h
Transfer to
(an active call in hands-free
mode is transferred over to the telephone)
#
Select a function.
Putting an active call on hold
#
Tap on the contact or the call.
The call is put on hold.
%
The call on hold can be ended any time or re-
activated by tapping again.
Conducting a call with several participants
Requirements:
R
There is an active call (
/
page 181).
R
Another call connection has been estab‐
lished.
Switching between calls
#
To switch call: select
Q
Switch calls
wechseln
(Switch calls).
#
Select the contact.
The selected call is active. The other call is on
hold.
Activating a call on hold
#
Select the contact for the call on hold.
Ending the active call
#
Select
k
End call
beenden
(End).
%
On some mobile phones, the call on hold is
activated as soon as the active call is ended.
Accepting/rejecting a waiting call
Requirements:
R
There is an active call (
/
page 181).
If there is an incoming call while a call is being
conducted, a notification is shown.
Depending on the mobile phone and the mobile
phone network provider you will hear a knocking
sound.
In addition, you will hear an acoustic signal in two
phone mode, if the call is incoming on the other
(still not active) mobile phone.
#
Select
R
Accept
.
The incoming call is active.
Multimedia system
181
Summary of Contents for Actros
Page 21: ......