The on-board computer first displays the mainte‐
nance due date in the event message automati‐
cally 14 days before the respective maintenance
date.
%
A qualified specialist workshop can program
the first message to appear between 0 to
30 days before the due date.
When the maintenance due date has been
reached or exceeded, the on-board computer will
show additional event messages.
&
WARNING Risk of accident due to mal‐
functions or system failures
If you do not have the prescribed service/
maintenance work or any required repairs
carried out, this could result in malfunctions
or system failures.
#
Always have the prescribed service/
maintenance work as well any required
repairs carried out at a qualified special‐
ist workshop.
When you switch on the ignition and a mainte‐
nance due date will soon be or has already been
reached, the on-board computer displays the
maintenance due date in the grey event message
(
/
page 124).
When the maintenance due date has been excee‐
ded, the on-board computer shows the overdue
maintenance in the yellow event message
(
/
page 129).
The maintenance system automatically notifies
you of maintenance due dates. Examples of this
are:
R
¯
Air filter
,
12.08.2018
,
3000 km
Maintenance due dates are displayed 14 days
before the respective inspection is due.
R
¯
Air filter
,
Maintenance due
The maintenance due date is due.
R
¯
Air filter
,
Maintenance due immediately
The maintenance due date has been excee‐
ded.
Opening/closing the maintenance flap
The fans for the condenser are under the mainte‐
nance flap on vehicles with electric stationary air
conditioning system.
&
WARNING Risk of injury due to moving
parts
The fans on the condenser run when the sta‐
tionary air conditioning system is in opera‐
tion. They may also continue to operate or
suddenly start if the engine is running.
If you have to open the maintenance flap:
#
remove jewellery and your watch.
#
never reach into the rotation area of the
fans.
#
keep items of clothing and hair away
from the fans.
The release levers are below the side panelling
above the headlamps.
#
To release and open: press the release lev‐
ers
2
on the left and right one after the
other in the direction of the arrow.
#
Swing the maintenance flap
1
upwards.
#
To close: swing the maintenance flap
1
down until it audibly engages.
Maintenance and care
321
Summary of Contents for Actros
Page 21: ......
