Mercedes-Benz Actros Operating Instructions Manual Download Page 192

Page: 192 / 418

The multimedia connection unit is on the co-driv‐

er's side of the multimedia display and is equip‐

ped with two type C USB ports.

Connect the USB device to the USB port.

USB splitters are not supported by the multi‐

media system.

When connecting several Apple

devices at

the same time, take note of the order in

which they are connected. The multimedia

system only connects with the device that is
connected first. Additional Apple

devices

connected at the same time will only be sup‐

plied with power.

Searching for and authorising the Bluetooth

audio equipment

Requirements:

Bluetooth

is activated on the multimedia

system and audio equipment (

page 163).

The audio equipment supports the Bluetooth

audio profiles A2DP and AVRCP.

The audio equipment is "visible" for other

devices.

Multimedia system:

Media

Bluetooth

Authorising a new Bluetooth

audio device

Select

Connect new device

Detected equipment is displayed in the device

list.

Select an audio device.

Authorisation starts. A code is displayed on

the multimedia system and on the mobile

phone.

The selected BTA device is set as the Primary

Phone.

If the codes are identical, confirm on the

audio equipment.

Select

Only as Bluetooth audio device

The Bluetooth

audio equipment is connected

with the multimedia system.

Connecting previously authorised Bluetooth

audio equipment

Select a Bluetooth

audio device from the

list.

The connection is established.

Starting media playback

Requirements:

A data storage medium is connected to the

multimedia system.

Multimedia system:

Media

Select

USB

Bluetooth

as the media source.

Controlling media playback

Multimedia system:

Media

To pause playback: select

To continue playback: select

To repeat a track: select

For repeating there are the following options:

Select once: the active playlist is repea‐

ted.

Select twice: the current track is repea‐

ted.

Select three times: repeat is deactiva‐

ted.

To play back tracks in random order:

select

To scroll back and forth through tracks:

tap on the desired position on the timeline.

To select the next track: select

To select the previous track : select

To scroll through tracks quickly: press and

hold on

To show the current track list: select the

track image shown.

190 Multimedia system

Summary of Contents for Actros



































































































































































































































































































































































































































Search results

Summary of Contents for Actros

Reviews:

Mercedes-Benz Actros, Operating Instructions Manual, Page: 192 / 418

Search results

Summary of Contents for Actros

Reviews: