Mercedes-Benz 240 D 1980, Owner'S Manual

Page: 70 / 93

Electrical System
1 8 8 8 0
3
4
5
6
7
8
9
10
Fog lamp
Turn signal, parking, side
marker and standing lamp
Securing nuts fo r cover
Securing nuts fo r tu rn signal,
parking, side marker and stand­
ing lamp
Vertical aim ing screw, sealed-
beam unit
Horizontal aim ing screw,
sealed-beam unit
Vertical aim ing screw, fog
lamp
Horizontal aim ing screw,
fog lamp
Replacing Bulbs
To remove, push the bulb in and
tu rn to the left, then lift the bulb
out.
To install, grip the bulb w ith a pa­
per tissue or similar cloth, align the
. pins on the base of the bulb w ith
I the grooves in the bulb socket,
I push in lightly and turn to the right
until the stop is felt.
Install only bulbs o f prescribed
w attage. Refer to "Technical Data
and last page".
Headlamp A im ing
Correct headlamp aim ing is o f par­
am ount im portance to the road­
w orthiness o f the car. Check and
readjust headlamps at regular inter­
vals and invariably w hen a lamp
has been replaced.
Front Lamps
(Sealed Beam Version — USA
Specifications, Fog Lamp)
1 Cover. Remove cover (1) after
backing o u t knurled plastic
nuts located behind head­
lamps.
2 Sealed-beam unit fo r high and
low beam
68