Operating instructions wet waste treatment unit, Model AZP 80, AZ / AP 80
Datei:BA_AZP80_AZ_AP_9633432_EN_2005-10.docx
9633432
27/36
W e reserv e the right to c hange ex ec ution and constr uction!
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
12
Setting out of operation
This machine must be switched off after use and cleaning, or when no one is regularly
supervising its installation site!
Open the drain valve.
Close the stop valve on the
water pipe.
Switch off the main
power supply from the
building.
The food waste treatment machine is now isolated from the power supply.
The wet waste treatment unit is now ready for the next shift.
13
Suggestions for trouble shooting
Despite of a well proved construction minor faults can occur which normally can easily be
repaired. We have listed some possible faults and explained how they can be repaired so
that you are able to repair minor defects by yourself.
Please note:
When working at the machine, please always switch off the
main switch before and consult an electrician !
Fault
Remedy
Motor of grinder resp.
solid parts separator does
not work!
•
Fuses are blown off. Check motor protector for
motors.
Attention:
Disconnect the switch box by switching off the
main switch or by removing the local main fuse.
We do not assume liability for any damages
resulting from non-observance of this
regulation.
