Symptom
Possible cause
Possible solution
flow divider)
resulting in length
difference
found at page Error:
Reference source not
found.
Difference on display will
remain
Tolerances in the forks
construction result in
differences in length
The physical length of the
forks is not equal to the
distance on the display /
preset stop distance
(without flow divider)
Tolerances in the forks
construction result in
differences in length
Reduce the length of the
preset by the required
margin, see chapter Error:
Reference source not
found at page Error:
Reference source not
found
Difference on display will
remain
Tolerances in the forks
construction result in
differences in length
Restart you Android device
and the app (app on 3
rd
party device only)
Restart the Controller
following instructions in
chapter Working with the
Controller at page 25
(Controller only)
Cylinder/fork length does
not correspond to
displayed value
Leakage in hydraulic
system
Tighten all hydraulic
couplings and check all
seals for leakage
1
Air in hydraulic system
Bleed the air out of the
hydraulic system
1
App/Controller not properly
calibrated
Follow instructions in
chapter Error: Reference
source not found at page
Error: Reference source not
found
32
