Meijer KOOI ReachControl, Instructions And Parts Manual

Page: 12 / 40

Modules
Below is a list with the possible modules which are available in the KOOI®
ReachControl product family. You may have purchased one or more of them. Please
follow the cross references to the page containing the specific information and
instructions for your module(s):
If your system contains a
Flow meter with integrated angle sensor
(optional), please
continue at page
12.
If your system contains a
Controller (optional), please continue at page
22.
For information on the
ReachControl app (required), please continue at page
26.
Flow meter with integrated angle sensor
The term ‘forklift’ will be used for any forklift truck, lifter or similar vehicle
used for lifting and transporting loads.
The term ‘left’ and ‘right’ when used in combination with ‘forklift’ refer to the
left or right as seen from the driver’s seat.
The ‘KOOI-REACHFORKS®‘ are hydraulically extendable forklift forks that are
sold under this trademark. From here on they are referred to as ‘forks’.
The flow meter can be used with virtual any set of hydraulically extendable
forks regardless of the manufacturer / brand.
Keep the hose length between flow meter and KOOI-REACHFORKS® /
hydraulic cylinder as short as possible to reduce deviation in the
measurement system due to expansion of the hoses.
12