Troubleshooting
Symptom
Possible cause
Possible solution
Oil leak near one of
couplings
Loose coupling
Tighten coupling
Both angle and length
measurements do not
change when using the
flow meter
Battery sensor empty
(without Autostop only)
Replace battery of sensor
following instructions in
chapter Without Autostop –
battery (re)placement at
page 19
No Bluetooth® connection
to sensor
Check Bluetooth® icon in
app/Controller. If gray
following instructions in
chapter Error: Reference
source not found at page
Error: Reference source not
found
Both angle and length
measurements on display
do not change when using
the flow meter
Connected to wrong sensor Connect to correct sensor
following instructions in
chapter Error: Reference
source not found at page
Error: Reference source not
found
Flow direction of flow
meter not properly
calibrated
Follow instructions in
chapter Error: Reference
source not found at page
Error: Reference source not
found
Sensor does not receive
power (Autostop only)
Check connection power
cable to sensor
The physical length of the
forks is not equal to the
distance on the display /
preset stop distance (with
The flow divider has a
tolerance which results in
somewhat unequal
movement of the forks,
To Reduce the length of the
preset by the required
margin, see chapter Error:
Reference source not
31
