Connector solenoid (valve)
Connector flow meter
Pin no.
Assignment
Pin no.
Assignment
1
- (flow meter)
1
- (solenoid)
2
+12/24VDC (flow meter)
2
+12/24VDC (solenoid)
3
- (forklift)
4
+12/24VDC (forklift)
Table 2: Pin assignments
Working with the flow meter
When the flow meter and optionally the Autostop valve are installed they are ready for
use with either the Controller (continue at chapter Controller, page 22) or the app
(continue at chapter ReachControl app, page 26).
Maintenance
The battery of the flow meter without Autostop requires periodic replacement. The
Controller or app will give a ‘low battery warning’ when replacement is needed. Replace
the battery as soon as the ‘low battery warning’ appears. See chapter Without Autostop
– battery (re)placement at page 19 for instructions.
No further maintenance on the flow meter or Autostop valve are required. For attached
hoses, cables and equipment please follow maintenance instructions as provided by
their suppliers.
21
